Characterization and improvement of a measurement setup for filament resistance and extrusion force

Fused Filament Fabrication (FFF) is a widely used additive manufacturing method, yet the material flow within the hot-end remains poorly understood. Slicer software relies on an ideal model of the material flow, but the true behaviour of the molten plastic is difficult to characterise and compensate for accurately. This mismatch between estimated and actual extrusion leads to inconsistent material deposition, resulting in dimensionally inaccurate parts and poor visual and physical quality. The behaviour of the hot-end during extrusion is investigated by improving an existing measurement setup for in-situ measurements of electrical resistance and extruder force using conductive filament as a sensing medium. These measurements are characterised as a function of process parameters such as extrusion speed and filament composition, providing insight into the thermal and flow phenomena occurring within the hot-end.

The results contribute to a deeper understanding of the extrusion process and may support the development of extrusion compensation strategies to improve print consistency in FFF systems.